Technical Parameters
| Specification： | DIN EN 60 664 / DIN EN 61 984 |
| Rated current： | 10A |
| Rated voltage： | 250V |
| Rated pulse voltage： | 4kV |
| Degree of pollution： | 3 |
| Parameters at contamination level 2： | 10A 230/400V 4kV 2 |
| Rated voltage according to UL/CSA： | 600V |
| According to CSA winding connection rated voltage： | 2A 30V |
| Insulation resistance： | ≥1010Ω |
| Material： | 聚碳酸酯 Polycarbonate |
| Operationg temperature： | -40℃~+125℃ |
| Flame retardant grade： | V0 |
| Unpluggable time： | ≥500 |
| Pin material： | 铜合金 Copper Alloy |
| Surface treatment： | 镀金 Hard-gold Plated / 镀银 Hard-silver Plated |
| Contact resistance： | ≤3mΩ |
Connection mode
Current carrying capacity
Current carying capacity
The current carrying is limited by maximum temperature of materials for inserts and contacts including terminals.
Measuring and testing techniques according to DIN EN 60512-5.
Modified contact arrangement up to 500V
The connector seris HD equiped with all contacts may be used for voltage up to 25V~pollution degree 3.A modified contact loading arrangement permits use up to 500V Pollution degree also in pollution degree C.
Contact arrangement view from terination side
TYPE | NAME | Rated voltage | Rated current | Contact numbers | 3D upload | 2D upload |
HD-040-MCN(1-40) | HD Hight-Density Inserts Crimp termina 80+PE Male(1-40) | 250V | 10A | 80+PE |
|
|
HD-040-MCN(1-40 | HD Hight-Density Inserts Crimp termina 80+PE Male(1-40) | 250V | 10A | 80+PE |
|
|
HD-040-FCN(1-40) | HD Hight-Density Inserts Crimp termina 80+PE Female(1-40) | 250V | 10A | 80+PE |
|
|
HD-040-FCN(1-40) | HD Hight-Density Inserts Crimp termina 80+PE Female(1-40) | 250V | 10A | 80+PE |
|
|
Dimensions
