HK-004/8 Screw terminal
Technical Parameter
| Specifiation： | DIN EN 60 664 / DIN EN 61 984 |
| Power region | |
| Rated current： | 80A |
| Rated voltage： | 830V |
| Rated pulse voltage： | 6kV |
| Pollution level： | 3 |
| Parameters at pollution level 2： | 80A 1000V 8kV 2 |
| Safe zone | |
| Rated current： | 16A |
| Rated voltage： | 400V |
| Rated pulse voltage： | 6kV |
| Pollution level： | 3 |
| Parameters at pollution level 2： | 16A 400/690V 6kV 2 |
| Rated voltage according to UL/CSA： | 600V/300V |
| Insulation resistance： | ≥1010Ω |
| Material： | 聚碳酸酯 Polycarbonate |
| Operating temperature： | -40℃~+125℃ |
| Flame retardant grade： | V0 |
| Removable times： | ≥500 |
Inserting pin
| Power region | |
| Material： | 铜合金 Copper Alloy |
| Surface： | 镀银 Hard-silver Plated |
| Contact resistance： | ≤0.3mΩ |
| Screw Terminal | |
| Wire Gauge： | 1.5-16mm2 |
| AWG： | 16-6 |
| Tightening torque | |
| mm2： | 1.5 2.5 4 6 10 16 |
| N.m： | 1.2 2 3 3 3 3 |
| Strip length： | 14mm |
| Signal zone | |
| Material： | 铜合金 Copper Alloy |
| Surface： | 镀银 Hard-silver Plated |
| Contact resistance： | ≤1mΩ |
| Screw Terminal | |
| Wire Gauge： | 0.5-2.5mm2 |
| AWG： | 20-14 |
| Tightening torque： | 0.5Nm |
| Strip length： | 7.5mm |
Current carying capacity
The current carrying is limited by maximum temperature of materials for inserts and contacts including terminals.
Measuring and testing techniques according to DIN EN 60512-5.
TYPE | NAME | Rated voltage | Rated current | Contacts number | 3D upload | 2D upload |
HK-004/8-M | HK Combination inserts Screw terminal 4/8+PE Male | 400V/400V | 80A/16A | 4/8PE |
|
|
HK-004/8-F | HK Combination inserts Screw terminal 4/8+PE Female | 400V/400V | 80A/16A | 4/8+PE |
|
|
Dimensions
